What is a Tub Clog?
A tub clog is a blockage in the drain of your bathtub that prevents water from draining properly. Clogs can be caused by a variety of things, including hair, soap scum, and other debris. If left untreated, clogs can cause water to back up in the tub and create an unpleasant mess. Fortunately, there are several ways to unclog your tub quickly and easily. One of the most effective methods is snaking.
What is Snaking?
Snaking is a process that involves using a long, flexible cable to remove blockages from your tub’s drain. The cable is inserted into the drain and then pushed through the clog until it breaks up or dislodges it. Snaking can be done with either manual or powered tools, depending on the severity of the clog.
How to Snake Your Tub: A Step-by-Step Guide
Snaking your tub may seem intimidating at first, but it’s actually quite simple once you know what you’re doing. Here’s a step-by-step guide to help you get started:
Step 1: Gather Your Supplies
The first step in snaking your tub is to gather all of the supplies you’ll need for the job. You’ll need a snake (either manual or powered), gloves, goggles, and a bucket or container for collecting any debris that comes out of the drain.
Step 2: Prepare Your Tub
Once you have all of your supplies ready, it’s time to prepare your tub for snaking. Start by removing any stoppers or covers from the drain so that you have easy access to it. Then fill the tub with about two inches of water so that there’s enough pressure for snaking.
Step 3: Insert The Snake
Now it’s time to insert the snake into the drain. Start by feeding one end of the snake into the drain until it reaches as far as it can go without getting stuck (usually about three feet). Then slowly turn the handle on top of the snake in order to push it further down into the pipe until you feel resistance from a clog or obstruction.
Step 4: Remove The Clog
Once you feel resistance from a clog or obstruction, start turning the handle on top of the snake in order to break up or dislodge whatever is blocking your drain pipe. As you do this, keep an eye out for any debris that may come out of the pipe and collect it in your bucket or container so that it doesn’t end up going down your pipes again later on.
Step 5: Test The Drain
Once you think you’ve removed all of whatever was blocking your drain pipe, test out your work by running some hot water down your tub’s drain for several minutes and seeing if it drains properly without any backups or slow draining issues occurring again soon afterwords.. If everything looks good then congratulations! You just successfully unclogged your own bathtub!
Unclogging a bathtub can be intimidating at first but with this step-by-step guide and some patience anyone can do it! With just a few simple steps and some basic supplies like gloves and goggles anyone can unclog their own bathtub quickly and easily using snaking!